Word Branch Publishing Announces the Release of The Wilding Days

Noted author jerjonji’s fourth book is projected to be a top seller.

Marble, NC, October 30, 2014 -- Renowned young adult author jerjonji, the alter ego of Jeri Maynard, releases her fourth novel with Word Branch Publishing. Author the Kindle top 100 young adult book Panda Girl as well as Four Winds and Read Kicks, jerjonji masterfully weaves a tale of intrigue and love, mystery and danger, friendship and dark obsession that leaves readers hanging on every word.

“The Wilding Days has all the attributes of her first three books: vivid characters, a well-timed plot, a story that we can relate to,” says publisher Catherine Rayburn-Trobaugh. “But there is something more in this book; she has crossed the line into fine dramatic fiction, a novel that is both enticing and profound.”

The book skillfully presents shifts in time through the use of character point of view. Kaiden Wilding is a man trapped inside himself, alone with his thoughts of the past and their impact on the present. After a tragic and deadly event takes place, no one can reach Kaiden in his catatonic state. While his wife and friends rally to his side, Kaiden lives out his ‘wilding days’ in his mind. James, his best friend since high school, attempts to put the pieces together to unravel the mystery of both then and now, and struggles to understand Kaidan’s fixation with a mysterious girl from his youth.

The Wilding Days, as well as jerjonji’s other books, is a available on Amazon, Barnes & Noble and fine bookstores everywhere as well as the Word Branch Publishing Book Shop: http://www.wordbranch.com/the-wilding-days.html

You can find out more about jerjonji and her writing in a recent TV interview http://www.wordbranch.com/jerjonji.html.

Word Branch is an independent publishing company located in the heart of Appalachia. WBP represents talented new and emerging authors who need a venue to make their voices heard. Word Branch offers unique titles in both paperback and e-books in a variety of genres including science fiction, fantasy, young adult and Native American.


Contact:
Catherine Rayburn-Trobaugh
Word Branch Publishing
PO Box 41
Marble, NC 28905
828 837 5277
catherine@wordbranch.com
http://www.wordbranch.com

Ebola, Toxic Mold, & Bioterrorism Decontamination Training for Arizona Rescue Squads from E.H.A.

The Environmental Hygienists Association introduces Certified Decontamination Specialist training and certification to handle Ebola, toxic mold, and bioterrorism threats for key personnel and managers of Arizona fire department rescue squads, public health agencies, hospitals and other city, state, and federal government administrative personnel.

Montrose, MI, October 30, 2014 -- The Environmental Hygienists Association (E.H.A.) Certified Decontamination Specialist training and certification is ideal and necessary for key personnel, managers, and owners of Arizona mold remediation and water/fire damage restoration companies, fire department rescue squads, public health departments and agencies, hospitals, nursing homes, city building inspection departments, state government administrative officials, city and town government administrative officials, and federal health, safety, and environmental agency personnel.
Training can be entirely distance learning at home or at work with online and textbook study materials, or in combination with three days of online or intensive classroom and hands-on decontamination equipment training in the E.H.A. training center in Montrose, Michigan, or in special decontamination training seminars that E.H.A. can conduct for company or agency employees in Phoenix, Scottsdale, Mesa, Tucson, Yuma, Flagstaff, or in any other Arizona city or town.

For more information on E.H.A. decontamination training and certification, visit www.decontaminationgear.com or www.ecology-college.com, or phone training director Phillip Fry toll-free 1-866-300-1616 or 1-810-639-0523 or cell phone 1-480-310-7970, or email phil@moldinspector.com.

During the Environmental Hygienists Association online, textbook, and (optional ) in person class training, students master how they can---

1. Prepare and follow a well-thought-out decontamination protocol plan custom-created for the specific home or other building being decontaminated.
2. Wear and use appropriate and complete personal protective gear for total personal safety during environmental inspections and decontamination procedures.
3. Test room and area air for biological dangers such as airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
4. Test the outward air from heating and cooling air duct supply registers for elevated levels of airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
5. Use a high resolution, 63 feet long fiber optics inspection cable with video camera to visually inspect inside heating, ventilating, and air conditioning (HVAC) equipment and ducts for bacteria, viral, and toxic mold spores infestations.
6. Test the surfaces and the insides of room ceilings, walls, floors, attics, basements, and crawl spaces for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
7. Use a high resolution infrared camera to scan all floors, walls, ceilings, building exterior, attic, basement, and crawl spaces for hidden moisture (that would indicate possible hidden toxic mold growth).
8. Test the building’s water supply and water storage facilities for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
9. Test painted older surfaces and building materials for the possible presence of lead.
10. Collect samples of older building materials for asbestos lab analysis.
11. Do radon testing of the building;
12. Test clothing, drapery, carpeting and padding, rugs, furniture, furnishings, and other personal possessions for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
13. Whether done for a remediation and/or prevention purpose, decontaminate all building surfaces, furniture, furnishings, personal possessions, and heating/cooling equipment and ducts with high-tech decontamination gear and procedures such as:

(a) Rotobrush™ air duct cleaning equipment to remove mold spores, germ growth, and dirt inside HVAC ducts;
(b) fogging an EPA-registered (for use in HVAC ducts) biocide to kill HVAC duct germs, mold spores, and mold growth;
(c) high EnviroFry output ozone generators to kill airborne toxic mold spores, bacteria, and Ebola and other viruses;
(d) advanced radiant oxidation equipment to kill toxic mold spores, Ebola and other viruses, bacteria, volatile organic compounds (VOCs), and dust from indoor air;
(e) high capacity air scrubbers (with giant HEPA and activated carbon filters) to remove airborne Ebola and other viruses, bacteria, mold spores, volatile organic compounds (VOCs), dust, and other air contaminates and pollutants from the indoor air;
(f) HEPA vacuuming of all walls, floors, and furnishings to remove landed or deposited mold spores , bacteria, viruses, and other contaminates;
(g) wiping and cleaning all walls, floors, and furniture and furnishing surfaces with an EPA-registered biocide to kill germs, mold spores, and mold colony growth;
(h) fogging an EPA-registered biocide in the air of all rooms and areas to kill germs, mold spores, and mold colony growth; and
(i) fogging EnviroFry enzyme neutralizer in all rooms and areas to neutralize germs, mold spores, and mold colony growth.
For toxic mold inspection, testing, and removal anywhere in Arizona, please visit email Lee Maglanoc, of Mesa, Arizona at azmoldinspector@yahoo.com, or phone 602-757-1918, or visit the websites: www.arizonamoldinspection.net, www.scottsdalemoldinspection.com, www.mesamoldinspection.com, www.tucsonmoldinspector.com, or www.sedonamoldinspection.com.


Contact:
Phillip Fry, Training Director
Environmental Hygienists Association
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 or 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com or
http://www.ecology-college.com

Extra Mile Day: Why “Going the Extra Mile” Should Matter To You

On November 1st, over 520 cities from across the United States will proclaim Extra Mile Day...a day recognizing the capacity we each have to create positive change in ourselves, families, organizations and communities when we go the extra mile.

Los Angeles, CA, October 29, 2014 -- On November 1st, over 520 cities from across the United States will proclaim Extra Mile Day...a day recognizing the capacity we each have to create positive change in ourselves, families, organizations and communities when we go the extra mile. This passionate movement has a purpose of not only acknowledging local volunteer heroes and organizations across America who are “going the extra mile” in making a difference, but the message of the unique day has the power to change everything about our lives.

"We complain about all the things we don’t like in our lives, but all the complaining and wishing in the world won’t change things. When we wait for change, we’re wasting our breath, time and lives,” says Extra Mile Day Founder and motivational guru Shawn Anderson. “Going the extra mile to create that change, however, changes our career options, our financial futures, our relationships and our health. Going the extra mile has the power to change everything about our lives.”

Created in 2009 with 23 cities making the inaugural declaration, Extra Mile Day has continued to build enthusiastic momentum each year since. This year, 520+ cities will make the unique declaration.

According to Anderson, “The Extra Mile Day movement reminds us that the positive change we seek in our lives and in society begins not with a partner, a boss or a government program. Change begins with the person we each look at every day in the mirror.”

Contact:
Shawn Anderson
Extra Mile America
Los Angeles, CA
(310) 402-4826
shawn@extramileamerica.org
http://extramileamerica.org

Bolton Students Globally Release New Interactive Smartphone Film

Where can you find a film that lets you watch, play and interact? Bolton, of course. “Codename: Winterhill” is a story where you must help the characters and the story is delivered in an innovative new format onto smartphones across the world.

Manchester, UK, October 29, 2014 -- After a 3-year development process University of Bolton Media Studies Students and the Manchester Transmedia company Bellyfeel are finally ready to show the world the results of their new storytelling collaboration.

“Codename: Winterhill” is a story that puts the audience into the action as a character. In the story, people are going missing and you are next. You must interact via SMS, phone calls, websites and video to uncover who is behind the disappearances and the strange goings on around Bolton.
This all happens on your smartphone. Anyone can get involved and all it costs are a few txt messages. Sign up to the story now at: www.boltonstoryworld.com or send a text message containing the word STARTBSW to +441204238483 (Or you can enter the story via a character’s fake bakery website, where you can win a very real £50! Here )

You will get straight into the story and the action starts on 3rd November, running for a 5-day campaign – then following on, viewable as a replay.

Anna Zaluczkowska, Course Leader Media, Writing and Production says, "We wanted to update student media skills to match new audience behaviours. The student writers have created some great stories and characters that start in the digital world and spill out into real life. It's a very exciting project."

Bellyfeel’s Managing Director Krishna Stott says, “This is exactly the kind of new storytelling that will engage a modern audience. The students have done some great work on this project and it’s brilliant that it will now be seen by a global audience.”

Webby Award winning Bellyfeel is a leader in storytelling and modern audiences. They produce, consult and develop work across multiple platforms and devices.

Contact:
Krishna Stott
Bellyfeel
125 Innovation Forum, Frederick Road,
Salford, Manchester, M6 6FP
0161 743 4540
press@bellyfeel.co.uk
http://www.bellyfeel.co.uk

Pictures:

Bloomingmore.com - Your Online Flower Market Place

Exclusive Prices for Painted Ruscus in a Variety of Colors for all Occasions and Events only at Bloomingmore.

Doral, FL, October 28, 2014 -- Leading the market in quality, customer service, and satisfaction guarantee in online flower sales, Bloomingmore is making a bold statement promoting painted Ruscus offering the best price and variety online today. Whether planning a wedding, a house party or holiday event this flower is among the most popular and growing in demand. Painted Ruscus add elegance to any floral design by highlighting your flowers with slender elongated leaves. Ruscus as a flower filler is perfect for adding texture, greenery and volume to your flower centerpieces and bouquets, allowing planners and designers more creative freedoms!

The possibilities are limited only by the imagination! Frame your flowers with Pastel Hot pink, Red and Pink Ruscus adding sweetness to baby showers, Valentine's celebrations and sweet sixteen floral decorations. Painted in a very vibrant and refreshing color, Aquamarine Ruscus is the ideal filler to highlight the beauty and color of each flower. When complementing Thanksgiving, Halloween and fall flowers, Painted Orange Ruscus is a stunning filler that will add volume, and enhance the various colors of the season. Add some White, Silver and Gold Ruscus to commemorative arrangements, school events and team rallies. Perfect for summer and spring centerpieces, make your bouquet of white, yellow and green flowers unique with painted Pastel Lime Green Ruscus. Create a celestial background for white roses with blue Ruscus, or use colorful painted Ruscus by themselves for festive décor!


With a dynamic, user friendly website containing a large selection of bulk flowers, Centerpieces, and Bridal Bouquets catering to Do-It-Yourself event planners and holiday enthusiasts, Bloomingmore’s Ruscus selection is but the tip of the iceberg. Online Shoppers can indulge in quality Roses, Hydrangeas, Rose and Hydrangea Petals, Greens, Baby’s Breath, Hypericum, Mini Calla Lilies, and Spider Mums, each with their own repertoire of colors and additives; As consumer preference increasingly tips towards online shopping, Bloomingmore has positioned itself at the forefront of the race amongst competitors providing Free Shipping and Continental Delivery of Farm Direct Flowers with 100% Freshness Guaranteed.


Contact:
Customer Service
Bloomingmore
Doral, FL
1 855 625 6667
customerservice@bloomingmore.com
https://www.bloomingmore.com

Extra Mile Day: Why the “Go the Extra Mile” Message Matters

On November 1st, over 500 cities from across the United States will proclaim Extra Mile Day...a day recognizing the capacity we each have to create positive change in ourselves, families, organizations and communities when we “go the extra mile.”

Los Angeles, CA, October 28, 2014 -- On November 1st, over 500 cities from across the United States will proclaim Extra Mile Day...a day recognizing the capacity we each have to create positive change in ourselves, families, organizations and communities when we “go the extra mile.” According to Extra Mile Day founder Shawn Anderson, the message of the unique day has the power to change everything about our lives.

“Imagine if you asked your boss ‘What more can I do to help us succeed?’ Imagine if you asked a friend, ‘What can I do to help you reach one of your goals?’ Imagine if you reached out to a service organization in your community and said ‘I’m available,’” says Anderson, the Founder of Extra Mile America, the organization behind Extra Mile Day. “It’s this sort of extra-mile imagination and effort that has the power to change everything about our lives.”

Whether it is in encouraging others to continue to pursue fading dreams or uplifting people to not let life's tragedies derail hope, Anderson dedicates his life to inspiring others to maximize their potential and contribution. His message is consistent and to the point: "Want a better life? Go the extra mile.”
First spreading the “go the extra mile” message across the U.S. in 2009, Anderson used a symbolic 4,000-mile ocean-to-ocean solo bike ride. On the ride, the 47-year-old non-bicyclist held motivational events in 21 national cities. At these events, Anderson interviewed over 200 people who had been recognized as going the extra mile in overcoming personal setback or who had risked everything in order to accomplish something extraordinary. After the ninety-day tour, Anderson, a motivational speaker and author, personally gave away $10,000 to those people whose stories he found especially inspiring.

"We complain about all the things we don’t like in our lives, and we spend time wishing for better jobs, more money, and happier relationships,” says motivational guru Anderson. “But all the complaining and wishing in the world won’t change things. It’s when we do more and give more than we currently are that we push the envelope of change in a different and positive direction. The Extra Mile Day movement reminds us that the positive change we seek in our own lives and in society begins with the person in the mirror.”


Contact info:
Shawn Anderson
Extra Mile America
Los Angeles, CA
(310) 402-4826
shawn@extramileamerica.org
http://extramileamerica.org

Ebola, Toxic Mold, & Bioterrorism Decontamination Training for Indiana Rescue Squads from E.H.A.

The Environmental Hygienists Association introduces Certified Decontamination Specialist training and certification to handle Ebola, toxic mold, and bioterrorism threats for key personnel and managers of Indiana fire department rescue squads, public health agencies, and other city, state, and federal government administrative personnel.

Montrose, MI, October 28, 2014 -- The Environmental Hygienists Association (E.H.A.) Certified Decontamination Specialist training and certification is ideal and necessary for key personnel, managers, and owners of Indiana mold remediation and water/fire damage restoration companies, fire department rescue squads, public health departments and agencies, hospitals, nursing homes, city building inspection departments, state government administrative officials, city and town government administrative officials, and federal health, safety, and environmental agency personnel.

Training can be entirely distance learning at home or at work with online and textbook study materials, or in combination with three days of intensive classroom and hands-on decontamination equipment training in the E.H.A. training center in Montrose, Michigan, or in special decontamination training seminars that E.H.A. can conduct for company or agency employees in Anderson, Bloomington, Evansville, Fort Wayne, Gary, Goshen, Indianapolis, Kokomo, Lafayette, Muncie, or any other city or town in Indiana.

For more information on E.H.A. decontamination training and certification, visit www.decontaminationgear.com or www.ecology-college.com, or phone training director Phillip Fry toll-free 1-866-300-1616 or 1-810-639-0523 or cell phone 1-480-310-7970, or email phil@moldinspector.com.

During the Environmental Hygienists Association online, textbook, and (optional ) in person class training, students master how they can---

1. Prepare and follow a well-thought-out decontamination protocol plan custom-created for the specific home or other building being decontaminated.
2. Wear and use appropriate and complete personal protective gear for total personal safety during environmental inspections and decontamination procedures.
3. Test room and area air for biological dangers such as airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
4. Test the outward air from heating and cooling air duct supply registers for elevated levels of airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
5. Use a high resolution, 63 feet long fiber optics inspection cable with video camera to visually inspect inside heating, ventilating, and air conditioning (HVAC) equipment and ducts for bacteria, viral, and toxic mold spores infestations.
6. Test the surfaces and the insides of room ceilings, walls, floors, attics, basements, and crawl spaces for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
7. Use a high resolution infrared camera to scan all floors, walls, ceilings, building exterior, attic, basement, and crawl spaces for hidden moisture (that would indicate possible hidden toxic mold growth).
8. Test the building’s water supply and water storage facilities for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
9. Test painted older surfaces and building materials for the possible presence of lead.
10. Collect samples of older building materials for asbestos lab analysis.
11. Do radon testing of the building;
12. Test clothing, drapery, carpeting and padding, rugs, furniture, furnishings, and other personal possessions for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
13. Whether done for a remediation and/or prevention purpose, decontaminate all building surfaces, furniture, furnishings, personal possessions, and heating/cooling equipment and ducts with high-tech decontamination gear and procedures such as:

(a) Rotobrush™ air duct cleaning equipment to remove mold spores, germ growth, and dirt inside HVAC ducts;
(b) fogging an EPA-registered (for use in HVAC ducts) biocide to kill HVAC duct germs, mold spores, and mold growth;
(c) high EnviroFry output ozone generators to kill airborne toxic mold spores, bacteria, and Ebola and other viruses;
(d) advanced radiant oxidation equipment to kill toxic mold spores, Ebola and other viruses, bacteria, volatile organic compounds (VOCs), and dust from indoor air;
(e) high capacity air scrubbers (with giant HEPA and activated carbon filters) to remove airborne Ebola and other viruses, bacteria, mold spores, volatile organic compounds (VOCs), dust, and other air contaminates and pollutants from the indoor air;
(f) HEPA vacuuming of all walls, floors, and furnishings to remove landed or deposited mold spores , bacteria, viruses, and other contaminates;
(g) wiping and cleaning all walls, floors, and furniture and furnishing surfaces with an EPA-registered biocide to kill germs, mold spores, and mold colony growth;
(h) fogging an EPA-registered biocide in the air of all rooms and areas to kill germs, mold spores, and mold colony growth; and
(i) fogging EnviroFry enzyme neutralizer in all rooms and areas to neutralize germs, mold spores, and mold colony growth.
For toxic mold inspection, testing, and removal anywhere in Indiana, please visit the websites: www.indianamoldinspection.com, www.fortwaynemoldinspection.com, and www.indianapolismoldtesting.com.


Contact:
Phillip Fry, Training Director
Environmental Hygienists Association
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 or 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com or
http://www.ecology-college.com

When the World Needs a Hero, It Calls...the Minions!

Variety’s Minions Gold Heart Pin Raises Money for Charity.

Los Angeles, CA, October 28, 2014 -- Universal Pictures and Illumination Entertainment have collaborated with Variety - the Children’s Charity to create limited-edition pins featuring Illumination’s beloved Minions for Variety’s 25th annual Gold Heart Pin Campaign. Proceeds will benefit Variety programs that serve children who are disabled and disadvantaged.

The collector’s item will be available for a minimum donation of $3.00 in movie theatres and select retail outlets nationwide from November 2014 - August 2015. A full list of participating locations can be found on www.usvariety.org.

“Variety’s goal is to make sure all kids reach theirs,” said Erica Lopez, executive director of Variety - the Children’s Charity of the United States. “We want everyone to be a part of that positive impact by making a contribution and wearing their Gold Heart on their sleeve.”

Since 1991, the Gold Heart Pin Campaign has been Variety’s signature fundraising endeavor. Variety works with one major motion picture studio every year, including Twentieth Century Fox, Walt Disney Studios Motion Pictures, Sony, Paramount, Warner Bros. and Universal Pictures to design a pin based on a film or character, including universally recognized characters Mickey Mouse, Kermit the Frog, E.T., Spider-Man, Shrek, Yogi Bear, Yoda, Darth Vader, R2-D2, C-3PO and now, the Minions. Through this partnership, the Gold Heart Campaign has raised millions of dollars to help children in need.

With an 86-year legacy of caring for children across the globe when family income, insurance, and the government cannot, Variety -the Children’s Charity has grown to 41 chapters in 11 countries and raised more than $1 billion to assist the treatment and care of children who are disabled and disadvantaged. Through direct grants and programs, Variety provides the gifts of independence, self-esteem, mobility and communication; survival, recovery, well-being and health; and education, confidence and achievement for children who are disabled and disadvantaged.


For More Information:
Erica Lopez
Variety
Los Angeles, CA
323 954 0820
info@usvariety.org
http://www.usvariety.org

Ebola, Germ, Toxic Mold, & Bioterrorism Decontamination Training for Ohio Rescue Squads from E.H.A.

The Environmental Hygienist Association provides ebola, germ, toxic mold and bioterrorism training for Ohio fire department rescue squads, health departments, and state and local officials.

Montrose, MI, October 27, 2014 -- The Environmental Hygienists Association (E.H.A.) Certified Decontamination Specialist training and certification is ideal for key personnel, managers, and owners of mold remediation and water/fire damage restoration companies, fire department rescue squads, public health departments and agencies, city building inspection departments, state government administrative officials, city and town government administrative officials, and federal health, safety, and environmental agency personnel.

Training can be entirely distance learning at home or at work with online and textbook study materials, or in combination with three days of intensive classroom and hands-on decontamination equipment training in the E.H.A. training center in Montrose, Michigan, or a local training seminar conducted in Akron, Canton, Cincinnati, Cleveland, Columbus, Dayton, Springfield, Toledo, or elsewhere in Ohio.

During the Environmental Hygienists Association online, textbook, and (optional ) in person class training, students master how they can---

1. Prepare and follow a well-thought-out decontamination protocol plan custom-created for the specific home or other building being decontaminated.
2. Wear and use appropriate and complete personal protective gear for total personal safety during environmental inspections and decontamination procedures.
3. Test room and area air for biological dangers such as airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
4. Test the outward air from heating and cooling air duct supply registers for elevated levels of airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
5. Use a high resolution, 63 feet long fiber optics inspection cable with video camera to visually inspect inside heating, ventilating, and air conditioning (HVAC) equipment and ducts for bacteria, viral, and toxic mold spores infestations.
6. Test the surfaces and the insides of room ceilings, walls, floors, attics, basements, and crawl spaces for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
7. Use a high resolution infrared camera to scan all floors, walls, ceilings, building exterior, attic, basement, and crawl spaces for hidden moisture (that would indicate possible hidden toxic mold growth).
8. Test the building’s water supply and water storage facilities for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
9. Test painted older surfaces and building materials for the possible presence of lead.
10. Collect samples of older building materials for asbestos lab analysis.
11. Do radon testing of the building;
12. Test clothing, drapery, carpeting and padding, rugs, furniture, furnishings, and other personal possessions for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
13. Whether done for a remediation and/or prevention purpose, decontaminate all building surfaces, furniture, furnishings, personal possessions, and heating/cooling equipment and ducts with high-tech decontamination gear and procedures such as:

(a) Rotobrush™ air duct cleaning equipment to remove mold spores, germ growth, and dirt inside HVAC ducts;
(b) fogging an EPA-registered (for use in HVAC ducts) biocide to kill HVAC duct germs, mold spores, and mold growth;
(c) high EnviroFry output ozone generators to kill airborne toxic mold spores, bacteria, and Ebola and other viruses;
(d) advanced radiant oxidation equipment to kill toxic mold spores, Ebola and other viruses, bacteria, volatile organic compounds (VOCs), and dust from indoor air;
(e) high capacity air scrubbers (with giant HEPA and activated carbon filters) to remove airborne Ebola and other viruses, bacteria, mold spores, volatile organic compounds (VOCs), dust, and other air contaminates and pollutants from the indoor air;
(f) HEPA vacuuming of all walls, floors, and furnishings to remove landed or deposited mold spores , bacteria, viruses, and other contaminates;
(g) wiping and cleaning all walls, floors, and furniture and furnishing surfaces with an EPA-registered biocide to kill germs, mold spores, and mold colony growth;
(h) fogging an EPA-registered biocide in the air of all rooms and areas to kill germs, mold spores, and mold colony growth; and
(i) fogging EnviroFry enzyme neutralizer in all rooms and areas to neutralize germs, mold spores, and mold colony growth.

For additional Ohio decontamination training and certification information, please phone training director Phillip Fry toll-free 1-866-300-1616, or 1-810-639-0523, or cell phone 1-480-310-7970, or email phil@moldinspector.com, or visit www.decontaminationgear.com.

For Ohio toxic mold advice and help, visit www.ohiomoldinspection.com, www.moldinspector.com, and www.moldexpertconsultants.com.


Contact:
Phillip Fry, Training Director
Environmental Hygienists Association
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 or 1-810-639-0523
Cell 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com

There is Huge Potential for Islamic Finance in the Mediterranean

CEO of FAAIF, Camille Paldi delivers presentation on Sukuk From A Mediterranean Perspective at the Malta Institute of Management in Valleta, Malta.

Valletta, Malta, October 26, 2014 -- CEO of FAAIF says that there is a unique opportunity in the Mediterranean for sukuk business due to the geographic location with proximity to continental Europe, Africa, and the Middle East, educated, multi-lingual, curious, and cosmopolitan populace, designated offshore status, sophisticated stock exchanges, and the existence of an established legal and regulatory framework including the MFSA Shariah Guidance Note for Islamic Funds (2009). Paldi mentions that nations such as Malta would benefit greatly at the moment by issuing a green sukuk, launching a bonds and sukuk trading platform akin to Tadawul in Saudi Arabia, engaging in bilateral agreements with the financial services authorities of jurisdictions participating in the Islamic finance business such as the UAE DIFC and Malaysia, strengthening the international strategy of the Malta Stock Exchange, implementing legislation to facilitate sukuk and Islamic finance transactions similar to Cyprus, increasing training and awareness on the island of Malta, and introducing an Islamic finance bankruptcy court in Malta as the sukuk default bankruptcy dispute resolution center for the Islamic finance industry. Paldi notes that the Malta Stock Exchange is listed by the SEC as a designated offshore securities centre, which makes it easy for US persons to trade and transact in Malta. In addition, it is quite easy to form an offshore company in this island nation. Paldi mentions that for these reasons and others, it is possible for Malta to secure SPV formation business for sukuk transactions in competition with the Cayman Islands. Malta could indeed become a European trading platform for sukuk. Paldi notes the importance of Malta to become involved in the Islamic finance industry, as many European nations and competing nations are advancing. For instance, the UK and Luxembourg have issued sukuk of US$500 Million each recently, which were both tremendously oversubscribed. In addition, Germany, France, and Spain are now engaging in Islamic finance business as well as Guernsey and Jersey. Paldi says that Ernst and Young predicts sukuk issuances to inflate to $900 Billion in 2017.

Paldi emphasized these points in the Malta Institute of Management’s Annual Mediterranean Economic Forum at the Xara Lodge in Valletta, Malta on 24 October 2014 in which the President of Malta, Her Excellency Marie-Louise Coleiro Preca gave the opening remarks. Paldi notices that the Maltese language descends from the Siculo-Arabic (the Arabic dialect that developed in Sicily and later in Malta, between the end of the ninth century and the end of the twelfth century). Therefore, Maltese contains many Arabic words and grammatical structures. Due to this linguistic harmony with Arabic and familiarity with Arab culture and the Islamic religion, Paldi says that the people of Malta and the Mediterranean may catch on to Islamic finance concepts and modes of finance quite quickly and easily. Paldi’s presentation can be found at http://www.slideshare.net/CamillePaldi/sukuk-from-a-mediterranean-perspective.

Sheikh Eshmail Ibrahim whom gave a presentation about the Shariáh Issues in sukuk structures at the Mediterranean Economic Forum comments that it is important to comply with the Shariáh as we move forward with sukuk structures and issuances. Dr. Joseph Muscat, Prime Minister of Malta said, “As a country we are actually considering whether we should issue a Sukuk ourselves, a small one, to see what the reaction of the markets would be and to give a political message that this is the sort of instrument we are in favour of...” Camille Paldi can be contacted at camille@faaif.com.

FAAIF Limited is a legal and management consultancy firm servicing clients in Islamic banking, finance, and takaful. FAAIF Events is an events production and management company.
http://www.faaif.com


Contact:
Camille Paldi, CEO
FAAIF Limited
Dubai, UAE
+971 56 950 0562
camille@faaif.com
http://www.faaif.com

Ebola, Toxic Mold, & Bioterrorism Decontamination Training for Michigan Rescue Squads from E.H.A.

The Environmental Hygienists Association introduces Certified Decontamination Specialist training and certification to handle Ebola, toxic mold, and bioterrorism threats for key personnel and managers of fire department rescue squads, public health agencies, and other city, state, and federal government administrative personnel.

Montrose, MI, October 26, 2014 -- The Environmental Hygienists Association (E.H.A.) Certified Decontamination Specialist training and certification is ideal and necessary for key personnel, managers, and owners of Michigan mold remediation and water/fire damage restoration companies, fire department rescue squads, public health departments and agencies, city building inspection departments, state government administrative officials, city and town government administrative officials, and federal health, safety, and environmental agency personnel.

Training can be entirely distance learning at home or at work with online and textbook study materials, or in combination with three days of intensive classroom and hands-on decontamination equipment training in the E.H.A. training center in Montrose, Michigan, or in special decontamination training seminars that E.H.A. can conduct for company or agency employees in Detroit, Grand Rapids, Lansing, Ann Arbor, Oakland County, Flint, Kalamazoo, or any other city or town in Michigan.

For more information on E.H.A. decontamination training and certification, visit www.decontaminationgear.com or www.ecology-college.com, or phone training director Phillip Fry toll-free 1-866-300-1616 or 1-810-639-0523 or cell phone 1-480-310-7970, or email phil@moldinspector.com.

During the Environmental Hygienists Association online, textbook, and (optional ) in person class training, students master how they can---

1. Prepare and follow a well-thought-out decontamination protocol plan custom-created for the specific home or other building being decontaminated.
2. Wear and use appropriate and complete personal protective gear for total personal safety during environmental inspections and decontamination procedures.
3. Test room and area air for biological dangers such as airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
4. Test the outward air from heating and cooling air duct supply registers for elevated levels of airborne bacteria, viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
5. Use a high resolution, 63 feet long fiber optics inspection cable with video camera to visually inspect inside heating, ventilating, and air conditioning (HVAC) equipment and ducts for bacteria, viral, and toxic mold spores infestations.
6. Test the surfaces and the insides of room ceilings, walls, floors, attics, basements, and crawl spaces for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
7. Use a high resolution infrared camera to scan all floors, walls, ceilings, building exterior, attic, basement, and crawl spaces for hidden moisture (that would indicate possible hidden toxic mold growth).
8. Test the building’s water supply and water storage facilities for biological dangers such as bacteria, Ebola and other viruses, toxic mold spores, and bioterrorism health threats such as weaponized Anthrax, Small Pox, and special toxic mold spores.
9. Test painted older surfaces and building materials for the possible presence of lead.
10. Collect samples of older building materials for asbestos lab analysis.
11. Do radon testing of the building;
12. Test clothing, drapery, carpeting and padding, rugs, furniture, furnishings, and other personal possessions for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
13. Whether done for a remediation and/or prevention purpose, decontaminate all building surfaces, furniture, furnishings, personal possessions, and heating/cooling equipment and ducts with high-tech decontamination gear and procedures such as:

(a) Rotobrush™ air duct cleaning equipment to remove mold spores, germ growth, and dirt inside HVAC ducts;
(b) fogging an EPA-registered (for use in HVAC ducts) biocide to kill HVAC duct germs, mold spores, and mold growth;
(c) high EnviroFry output ozone generators to kill airborne toxic mold spores, bacteria, and Ebola and other viruses;
(d) advanced radiant oxidation equipment to kill toxic mold spores, Ebola and other viruses, bacteria, volatile organic compounds (VOCs), and dust from indoor air;
(e) high capacity air scrubbers (with giant HEPA and activated carbon filters) to remove airborne Ebola and other viruses, bacteria, mold spores, volatile organic compounds (VOCs), dust, and other air contaminates and pollutants from the indoor air;
(f) HEPA vacuuming of all walls, floors, and furnishings to remove landed or deposited mold spores , bacteria, viruses, and other contaminates;
(g) wiping and cleaning all walls, floors, and furniture and furnishing surfaces with an EPA-registered biocide to kill germs, mold spores, and mold colony growth;
(h) fogging an EPA-registered biocide in the air of all rooms and areas to kill germs, mold spores, and mold colony growth; and
(i) fogging EnviroFry enzyme neutralizer in all rooms and areas to neutralize germs, mold spores, and mold colony growth.


Contact:
Phillip Fry, Training Director
Environmental Hygienists Association
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 or 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com or
http://www.ecology-college.com

Kill Ebola, Other Viruses, Bacteria, Toxic Mold, & VOC’s by Radiant Catalytic Ionization, Reports Fry

To kill Ebola and other viruses, bacteria, toxic mold, and other airborne or surface-deposited bio-contaminants, Certified Environmental Hygienist Phillip Fry recommends the use of portable or HVAC duct-mounted radiant catalytic ionizers.

Montrose, MI, October 25, 2014 -- “The most advanced air purification system is the use of radiant catalytic ionization, whether from a stand alone, desktop room radiant ionizer, or the installation of an even more powerful unit into the air supply ducts of a home or commercial building’s heating, ventilating, and air conditioning (HVAC) system,” reports Phillip Fry, Certified Environmental Hygienist, Professional Industrial Hygienist, and Certified Decontamination Specialist.

For a powerful but portable room radiant catalytic ionizer, Fry recommends the Guardian Air Desktop ionizer that utilizes the latest in air treatment technology, and which is available in the USA, Canada, Asia, Europe, the Middle East, Africa, Central and South America, and Australia/New Zealand. The picture, details, and price of the unit are posted at www.decontaminationgear.com.

The Guardian Air Desktop utilizes high intensity broad spectrum light waves directed on a sintered catalytic radiant grid that creates an advanced radiant catalytic air ionization that is radiated through a room in complete silence, with no fan, no moving parts, no maintenance, no filters, and with ultra low operating costs (the unit uses only 11 watts).

The Guardian Air Desktop generates safe ions and oxidants that silently travel throughout the room to oxidize and eliminate from the air viruses (such as Ebola), bacteria, toxic mold, volatile organic compounds, other gases, and odors.

Each unit can purify the air up to 800 square feet in just 24 hours to provide clean and fresh breathing air for residents, office workers, and other occupants.

Lab tests report that radiant catalytic ionization kills over 96% of airborne microbials, such as viruses, bacteria, mold spores, and volatile organic compounds.

Radiant Catalytic Ionization is effective on smoke, mold, mold and mildew odors, bacteria, viruses, volatile organic compounds (VOCs), airborne particulates, cooking odors, pet odors, and restroom odors.

The Guardian Air Desktop operates on 115 volts. The unit is compact in size with its dimensions being six inches wide by three inches deep by twelve inches high, and a weight of two pounds. Construction is of polymers. It is controlled with an on/off switch.

For additional information, visit www.decontaminationgear.com or email Phillip Fry phil@moldinspector.com or phone toll-free 1-866-300-1616 (USA and Canada) or 1-810-639-0523 for international callers or cell phone 1-480-310-7970.

For information about inspecting, testing, and removing toxic mold infestations anywhere in the world, visit www.moldinspector.com, www.moldexpertconsultants.com, and www.certifiedmoldinspectors.com.


Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 (USA and Canada)
Phone Toll-Free 1-810-639-0523 (international callers)
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com

Pacific Cash For Cars expand throughout Sydney

Pacific Cash For Cars, one of the major players in the used car buying industry in Sydney are preparing for a busy summer season, with the number of vehicles offered for sale increasing as the weather warms up.

Sydney, Australia, October 25, 2014 -- Pacific Cash For Cars, one of the major players in the used car buying industry in Sydney are preparing for a busy summer season, with the number of vehicles offered for sale increasing as the weather warms up.

The owner of Pacific Cash For Cars had this to say when we spoke to him on site at their new yard: “People start spending more time outside as the weather improves and gets warmer. What we find is that they’ve had the car or truck sitting there over winter and when it comes time to spend more time outdoors, they just want it gone.

“That’s where our team comes in. We offer them a price for the vehicle and arrange a time to pick it up. From there, our drivers go out and pick it up and pay them the arranged price. It’s a fairly simple process but it works really well and the customers are always happy to be able to get rid of their vehicles so easily.”

On a particularly warm Saturday in spring, the Pacific team were inundated with calls for car removals and we went along to a pick up with one of their drivers. When we got there, the seller of the car had this to say: “We’ve had this Toyota in the driveway for about a year and I’ve been meaning to either fix it or sell it. I suppose I’ve been a bit sentimental and should’ve really got rid of it a lot sooner. I came out to mow the grass between the concrete strips and realised that it needed to go. So, I called a few car wreckers and these guys offered the best price for it.”

The team plan to expand their operations to cover more of New South Wales and increase their marketing efforts to work on bringing new traffic to the website and more enquiries through the business.

More on Pacific Cash For Cars: Pacific Cash For Cars a Sydney based business specialising in buying used vehicles and dismantling them for exporting as parts. Based in Padstow, the team cover the greater Sydney region, offering vehicle removal within 24 hours of a booking being placed. You can find out more about Pacific Cash For Cars at www.PacificCashForCars.com.au or visit the company Google Plus page.


Contact:
Carla Contass
Pacific Cash For Cars
109 Gow Street, Padstow
Sydney, Australia 2211
0497 222 000
info@pacificcashforcars.com.au
http://www.pacificcashforcars.com.au

One Man's Passion Leads 500 Cities to "Go the Extra Mile"

On November 1st, over 500 cities from across the United States will proclaim Extra Mile Day...a day recognizing the capacity we each have to create positive change in ourselves, families, organizations and communities when we “go the extra mile.”

Los Angeles, CA, October 24, 2014 -- On November 1st, over 500 cities from across the United States will proclaim Extra Mile Day...a day recognizing the capacity we each have to create positive change in ourselves, families, organizations and communities when we “go the extra mile.” Growing from 23 cities in its inaugural 2009 year, Extra Mile Day is the vision of motivational guru Shawn Anderson, a man passionate about making his life count and empowering others to do the same.

Whether it is in encouraging others to continue to pursue fading dreams or uplifting people to not to let life's tragedies derail hope, Anderson has dedicated his life to inspiring others to maximize their potential and contribution. His message is consistent and to the point: "Want a better life? Go the extra mile.”

First spreading the “go the extra mile” message across the U.S. in 2009, Anderson used a symbolic 4,000-mile ocean-to-ocean solo bike ride. On the ride, the 47-year-old non-bicyclist created motivational events in 21 national cities. At these events, Anderson interviewed over 200 people who had been recognized as going the extra mile in overcoming personal setback or who had risked everything in order to accomplish something extraordinary. After the ninety-day tour, Anderson, a motivational speaker and author, personally gave away $10,000 to those people whose stories he found especially inspiring. He also captured many of these motivating stories in his fifth book, Extra Mile America: Stories of Inspiration, Possibility and Purpose.

Since 2009, Extra Mile Day has continued to build enthusiastic momentum with mayors across the U.S. With their declarations, mayors are recognizing the contribution of individuals and organizations in their local community who demonstrate an extra mile spirit in service and effort. "With millions of people hoping for someone else to make their lives better...a boss, a spouse, a government program...the Extra Mile Day movement reminds us that the positive change we seek in our own lives and in society begins with the person in the mirror," says Anderson. “When we sit around and wait for change, we’re wasting our breath, time and lives.”


Contact info:
Shawn Anderson
Extra Mile America
Los Angeles, CA
(310) 402-4826
shawn@extramileamerica.org
http://extramileamerica.org

First Midwest Ebola, Toxic Mold, & Bioterrorism Decontamination Specialist, Announced by EHA

The Environmental Hygienists Association announces that it has trained and certified Phillip Fry as Midwestern USA’s first Certified Decontamination Specialist to decontaminate homes and commercial buildings of Ebola, other viral and bacterial infestations, bioterrorism threats, and toxic mold.

Montrose, MI, October 25, 2014 -- Phillip Fry now has been trained and certified as Michigan, Ohio, Indiana, Wisconsin, and Minnesota’s first Certified Decontamination Specialist by the Environmental Hygienist Association (E.H.A.).

Mr. Fry has successfully completed the E.H.A. training for the building inspection, testing, and decontamination of Ebola, other dangerous viruses and bacteria, toxic mold, and bioterrorism threats such as weaponized Anthrax, Small Box, and special toxic mold spores.

For information on being trained and certified as a decontamination specialist, visit www.decontaminationgear.com and www.ecology-college.com.

Phillip Fry is also certified as a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified Environmental Inspector, Certified Remediation Specialist, Certified Mold Inspector, Certified Mold Remediator, Certified Air Duct Cleaning Specialist. He has over 16 years of experience across the U.S.A. and Asia in environmental inspection, testing, and remediation.

Included in Mr. Fry’s extensive decontamination training, he has mastered the use of enzyme neutralization of bacteria, viruses, and mold; spraying and fogging of E.P.A. biocides to kill bacteria, viruses, and toxic mold; HEPA-filtered air scrubbers and negative ion generators to remove indoor air pollutants and contaminants; ozone generator to kill airborne and surface bacteria, viruses, and toxic mold growth; and other high tech equipment such as fiber optics cable video camera inspection inside heating and cooling ducts, as well as air and surface testing techniques and procedures.

Mr. Fry also knows how to contain biological health threats during the decontamination procedures done for a home or commercial building and its furniture, furnishings, and personal contents.
For more information on decontamination equipment and the in depth E.H.A. protocol for building decontamination of Ebola, other biological infestations, and bioterrorism threats, visit www.decontaminationgear.com.

To contact Mr. Fry for environmental inspection, testing, and decontamination anywhere in the Midwest, Eastern, or Southern USA, email phil@moldinspector.com, or phone toll-free 1-866-300-1616 or 1-810-639-0523 or cell phone 1-480-310-7970, or visit www.moldexpertconsultants.com.


Contact:
Divine Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 (USA and Canada) or 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com and
http://www.ozonegeneratorkillsmold.com

Arizona’s First Decontamination Specialist for Ebola, Toxic Mold, & Bioterrorism, Announced by EHA

The Environmental Hygienists Association announces that it has trained Lee Maglanoc as Arizona’s first Certified Decontamination Specialist to decontaminate Arizona buildings of Ebola, other viral and bacterial infestations, bioterrorism threats, and toxic mold.

Montrose, MI, October 22, 2014 -- “Lee Maglanoc of Mesa, Arizona, has been trained and certified as Arizona’s first Certified Decontamination Specialist by the Environmental Hygienist Association (E.H.A.),” announced Phillip Fry, executive director of E.H.A.

“Mr. Maglanoc has successfully completed the E.H.A. training for the building inspection, testing, and decontamination of Ebola, other dangerous viruses and bacteria, toxic mold, and bioterrorism threats such as weaponized Anthrax, Small Box, and special toxic mold spores,” added Mr. Fry, who is also the webmaster of www.decontaminationgear.com and www.moldexpertconsultants.com.

Mr. Maglanoc is also certified as a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified Mold Inspector, and Certified Mold Remediator. He has over 20 years of experience in California and Arizona in environmental inspection, testing, and remediation.

Included in Mr. Maglanoc’s extensive decontamination training, he has mastered the use of enzyme neutralization of bacteria, viruses, and mold; spraying and fogging of E.P.A. biocides to kill bacteria, viruses, and toxic mold; HEPA-filtered air scrubbers and negative ion generators to remove indoor air pollutants and contaminants; ozone generator to kill airborne and surface bacteria, viruses, and toxic mold growth; and other high tech equipment such as fiber optics cable video camera inspection inside heating and cooling ducts, as well as air and surface testing techniques and procedures.

Mr. Maglanoc also knows how to contain biological health threats during the decontamination procedures done for a home or commercial building and its furniture, furnishings, and personal contents.

For more information on decontamination equipment and the in depth E.H.A. protocol for building decontamination of Ebola, other biological infestations, and bioterrorism threats, visit www.decontaminationgear.com.

To contact Mr. Maglanoc for environmental inspection, testing, and decontamination, email azmoldinspector@yahoo.com, or phone him 602-757-1918, or visit www.arizonamoldinspection.net.


Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 (USA and Canada) or 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com and
http://www.ozonegeneratorkillsmold.com

Ebola, Toxic Mold, & Biohazards Decontamination Training Curriculum Announced by E.H.A.

Ebola, toxic mold, and other biological building inspection, testing, and removal procedures and protocols are now taught in a new environmental training program to train and certify individuals across the world as a Certified Decontamination Specialist, reported the Environmental Hygienists Association.

Montrose, MI, October 21, 2014 -- “The new Ebola, toxic mold, and other biohazards building decontamination training curriculum is now available at www.decontaminationgear.com, so that governmental and private business employees worldwide can be well-trained and certified as a Certified Decontamination Specialist,” announced Phillip Fry, Executive Director, Environmental Hygienists Association (E.H.A.), and a Certified Environmental Hygienist and Professional Industrial Hygienist.

The E.H.A. online, textbook, and classroom decontamination training enables students to master how they can---

1. Prepare and follow a well-thought-out decontamination protocol plan custom-created for the specific home or other building being decontaminated.
2. Wear and use appropriate and complete personal protective gear for total personal safety during environmental inspections and decontamination procedures.
3. Test room and area air for biological dangers such as airborne bacteria, viruses, and toxic mold spores.
4. Test the outward air from heating and cooling air duct supply registers for elevated levels of airborne bacteria, viruses, and toxic mold spores.
5. Use a high resolution, 63 feet long fiber optics inspection cable with video camera to visually inspect inside heating, ventilating, and air conditioning (HVAC) equipment and ducts for bacteria, viral, and toxic mold spores infestations.
6. Test the surfaces and the insides of room ceilings, walls, floors, attics, basements, and crawl spaces for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
7. Use a high resolution infrared camera to scan all floors, walls, ceilings, building exterior, attic, basement, and crawl spaces for hidden moisture (that would indicate possible hidden toxic mold growth).
8. Test the building’s water supply and water storage facilities for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
9. Test painted older surfaces and building materials for the possible presence of lead.
10. Collect samples of older building materials for asbestos lab analysis.
11. Do radon testing of the building;
12. Test clothing, drapery, carpeting and padding, rugs, furniture, furnishings, and other personal possessions for biological dangers such as bacteria, Ebola and other viruses, and toxic mold spores.
13. Whether done for a remediation and/or prevention purpose, decontaminate all building surfaces, furniture, furnishings, personal possessions, and heating/cooling equipment and ducts with high-tech decontamination gear and procedures such as:

(a) Rotobrush air duct cleaning equipment to remove mold spores, germ growth, and dirt inside HVAC ducts;
(b) fogging an EPA-registered (for use in HVAC ducts) biocide to kill HVAC duct germs, mold spores, and mold growth;
(c) high EnviroFry output ozone generators to kill airborne toxic mold spores, bacteria, and Ebola and other viruses;
(d) high output EnviroFry negative ion generators with collector plates to remove mold spores, germs, viruses, and dust from indoor air;
(e) high capacity air scrubbers to remove airborne mold spores, dust, and other air contaminates and pollutants from the indoor air;
(f) HEPA vacuuming of all walls, floors, and furnishings to remove landed or deposited mold spores , bacteria, viruses, and other contaminates;
(g) wiping and cleaning all walls, floors, and furniture and furnishing surfaces with an EPA-registered biocide to kill germs, mold spores, and mold colony growth;
(h) fogging an EPA-registered biocide in the air of all rooms and areas to kill germs, mold spores, and mold colony growth; and
(i) fogging EnviroFry enzyme neutralizer in all rooms and areas to neutralize germs, mold spores, and mold colony growth.

For additional decontamination training and certification information, please phone training director Phillip Fry toll-free 1-866-300-1616, or 1-810-639-0523, or cell phone 1-480-310-7970, or email phil@moldinspector.com, or visit www.ecology-college.com and www.ozonegeneratorkillsmold.com.


Contact:
Phillip Fry, Executive Director
Environmental Hygienists Association
10104 Sheridan Rd.,
Montrose, Michigan 48457, USA
Phone toll-free 1-866-300-1616, 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com and
http://www.ecology-college.com

Kill Ebola & Other Germs in Buildings by Ozone & Ion Generators, Advises Enviro Hygienist Phil Fry

Ebola and other virus and bacteria building decontamination is most effective and affordable when the decontamination protocol includes high output ozone and negative ion generators, according to Certified Environmental Hygienist Phillip Fry.

Montrose, MI, October 19, 2014 -- “The decontamination protocol for Ebola and other high-risk heath threats should include both high output ozone gas and negative ion generators that are both highly effective, affordable, high-tech ways to decontaminate homes, other buildings, furniture, and furnishings infested with Ebola and other viruses, bacteria, germs, toxic mold spores,” reports Phillip Fry, Certified Environmental Hygienist and Professional Industrial Hygienist.

Ozone Kills Viruses, Bacteria, and Toxic Mold
Ozone gas is a regular, two oxygen atom molecule (0²) to which an extra oxygen atom has been temporarily added by the ozone generator to create a three oxygen atom molecule, (ozone gas) (0³).
This extra oxygen atom gives the molecule its ozone gas a very effective and powerful oxidizing power to kill Ebola virus infestations, Enterovirus, MRSA, MERS, H7N9 Avian Flu, SARS, Tuberculosis, influenzas, toxic mold spores, and other biological health threats.

“The EnviroFry high output ozone generator is ideal to decontaminate medical treatment and patient rooms in hospitals and other care facilities, as well as residences, hotel rooms, workplaces, public buildings, airplanes, buses, and trains that contain, or have been exposed to, biological health threats,” recommends Mr. Fry, who is co-manager of the international EnviroFry environmental hygienists firm, and also a former hospital administrator and former staff member of the National Institutes of Health (U.S. Public Health Service).

For more information on how ozone kills Ebola, other viruses and bacteria, and toxic mold spores and growth, visit www.decontaminationgear.com and www.ozonegeneratorkillsmold.com.

Negative Ion Generators and HEPA Filters Purify Indoor Air

The EnviroFry Negative Ion Generator is a high quality, long-lasting, highly effective, reliable negative room ionizer that puts into room air 80 to 100 trillion ions per second to removes particles from the air as small as .01 microns, such as pollen, dust, mold spores, pet dander, and other allergens.

The EnviroFry ionizer has two built-in, positively-charged collection plates to take negatively-charged pollutants out of the indoor air in the room being treated with massive numbers of negative ions.

Almost all airborne contaminants (dust, allergens, mites, germs, and other contaminants) carry a positive electrical charge. Ionizers collect and remove these positively charged ions using the principle of opposites attract.

When a high enough concentration of negative ions is disbursed into room air, the positively charged floating particles will fuse with the negatively charged ions and fall harmlessly to the unit’s positively-charged collection plates and/or to the floor and other surfaces to be removed through HEPA vacuuming and other decontamination procedures.

In addition, by removing airborne contaminants that would otherwise be inhaled, ionizers significantly reduce occupant sneezing, coughing, and throat irritations that would help spread Ebola and other viruses and bacteria to other people.

As an additional air purification machine, EnviroFry also offers its six-stage air purifier that removes indoor health threats by the combination of HEPA filter, germicidal UV lamp, activated carbon filter, ionizer, programmable ozone sanitizer, and anti-bacterial pre-filter.

For more information on how negative ion generators and six-stage air purifiers remove Ebola and other viruses and bacteria, as well as toxic mold spores, visit www.decontaminationgear.com. Read the ten steps for safe and effective mold removal and mold remediation at www.moldinspector.com/mold_removal.htm.

For additional information about the health dangers of exposure to elevated levels of indoor toxic mold, visit www.moldinspector.com and www.moldexpertconsultants.com.

Building decontamination questions can also be emailed to Phillip Fry phil@moldinspector.com or phoned to Phillip toll-free 1-866-300-1616 or 1-810-639-0523 or cell phone 1-480-310-7970, 8 a.m. to 6 p.m. eastern USA time zone, Monday through Saturday.


Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free 1-866-300-1616 (USA and Canada) or 1-810-639-0523
Cell Phone 1-480-310-7970
phil@moldinspector.com
http://www.decontaminationgear.com and
http://www.ozonegeneratorkillsmold.com

Swiftpage Act! CRM Virtual Road Show

Act Consultant, Author of 13 Books on CRM Software, Will Provide Demo Swiftpage Act! v17.

Fort Lauderdale, FL, October 17, 2014 -- The ACT v17 Virtual Road Show will be held on Wednesday, October 22, 2014, from 12 PM. to 1:30 PM. EST. The event is sponsored by Tech Benders and will feature presentations by Karen Fredricks, the woman who wrote the book (actually 7 books) on Act!. Benjamin Lederer, Senior Project Manager for Act! at Swiftpage, will be the co-presenter. Admission is free but prior registration at https://www1.gotomeeting.com/register/119268721 is required

Attendees will have the opportunity to purchase Act! v17 at special discounted pricing and have a look at some of the new ACT v17 enhancements including:

E-marketing which means Act! users will have the ability to design and send e-marketing pieces in the newly designed editor and have more options for tracking their effectiveness directly within Act!.

Smart Task improvements that will allow the automation of future actions based on field changes.

Document Integration to popular tools including Dropbox, SharePoint and iCloud for better sharing of your information with your remote users.

Karen Fredricks, an ACT Certified Consultant, Platinum ACT VAR and Premier ACT Trainer, will also present tips for transforming an Act! database into a true CRM marketing machine. The event will conclude with a Question & Answer session in which participants can direct questions to either Ms. Fredricks or Mr. Lederer.

According to Fredricks, “I hold a similar event every year. I look forward to these events because they allow me to interact directly with so many ACT users and to show even the most experienced CRM users how to unleash the power of Act!.”

Act!, which has over 6 million users worldwide, is the top selling contact and customer management software. Designed to allow users to increase the effectiveness of their sales and marketing efforts, Act! integrates seamlessly with other popular software including Microsoft Office, Google and QuickBooks.

About Karen Fredricks

Karen Fredricks, President of Tech Benders, is the author of 13 books including seven books on Act!, as well as titles on SugarCRM, Outlook, Outlook Business Contact Manager and Microsoft Office Live. A well known expert in the field of customer relationship management (CRM) software, she was selected by lynda.com to develop a series of Act! and Outlook training videos. Fredricks, who has over 20 years of experience, holds numerous software certifications and has an in-depth understanding of the operational, sales, and marketing requirements of businesses in a variety of industries.

About Tech Benders

Tech Benders specializes in CRM sales and marketing processes, custom Act! reports, Act! database repair and conversions, and discount Act! software. Tech Benders maintains offices in Florida and Oregon and uses state of the art tools to remotely support Act! users throughout the world.
For further information, contact Karen Fredricks of Tech Benders at 561-470-5450, Ext. 1. To register for the event go https://www1.gotomeeting.com/register/119268721.


Contact:
Karen Fredricks
Tech Benders
Fort Lauderdale, FL
Tel. No.: (561) 470-5450
info@techbenders.com
http://www.techbenders.com

Frion Farrell’s Supernatural Thriller, The Stone of Mesa, Available Now

Word Branch Publishing Releases the Second Book in the Myiar Series.

Marble, NC, October 17, 2014 -- Beneath the surface of the world as we know it, there is another world—one that blurs the boundaries between the seen and unseen, human and non-human, the secreted knowledge of the past and the startling discoveries of the present.

In the second book of the Myriar series, Kier Morton is summoned back to Britain from Australia by a late night phone call and is directed towards an unknown destination. She and her friend Gabbie find themselves in the heart of Wales, in a small university town, centuries rich in cultural heritage and esoteric mystery where they are eventually joined by other members of the extraordinary group of friends that had come together the previous year.
They discover that they have been brou
ght back together to pursue an elusive stone, one of the gems that have been fashioned by gifted humans that have gone before, paving the way for the last Seeds of the Myriar. Two of the stones have been stolen by the head of a secret organization, an age-old enemy of mankind. At the same time, a savage force is released from the Secret Vaults of the planet. This blindly stumbling, vast surge of energy is harnessed to create five predators seeking the destruction of the Myriar Seeds.

The struggle to evade pursuit and to combat betrayal leads Kier’s group to an otherwordly cave, to elemental Ireland, and finally to an isolated island off the coast of Wales. In the midst of tragic loss, the friends defeat the enemy, to solve the mystery of the Stone of Mesa.
To celebrate the release of Stone of Mesa, Word Branch Publishing is offering a special price for both books as well as a giveaway on GoodReads. Details can be found at http://www.wordbranch.com/coupons-and-promotions.html. The Myiar Series is available through Word Branch Publishing, Amazon, Barnes & Noble and other book shops worldwide.

Word Branch is an independent publishing company located in the heart of Appalachia. WBP represents talented new and emerging authors who need a venue to make their voices heard. Word Branch offers unique titles in both paperback and e-books in a variety of genres including drama, fantasy, young adult, and world literature.


Contact:
Catherine Rayburn-Trobaugh
Word Branch Publishing
PO Box 41
Marble, NC 28905
828 837 5277
catherine@wordbranch.com
http://www.wordbranch.com

EnviroFry Offers Houston Do-Your-Own Mold Test Scotch Tape Lift Sampling, Pictures, & Lab Report

EnviroFry announces its “do your own” mold testing service with lab analysis report of collected samples and submitted mold pictures for homeowners and other property owners, managers, and tenants in the Houston, Texas, metro area.

Montrose, MI, October 17, 2014 -- “Homeowners, other property owners, managers, and tenants everywhere in the Houston metro area and south Texas can now identify and quantify at low cost the toxic mold species types that may be infesting their buildings by using the do-it-yourself EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing Protocol,” announces EnviroFry co-manager Phillip Fry, and webmaster of www.houstontoxicmoldtesting.com and www.moldinspector.com.

Fry is a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified Environmental Inspector, and Certified Remediation Specialist, whose do-it-yourself mold testing lab service helps homeowners and other property owners, managers, and tenants in Houston, Baytown, Channelview, Cloverleaf, Deer Park, Friendswood, Galena Park, Galveston, Humble, Jacinto City, Jersey Village, La Porte, League City, Mission Bend, Missouri City, Pasadena, Pearland, South Houston, Sugar Land, Texas City, and elsewhere in southern Texas.

The do-your-own mold testing protocol includes these steps:

1. Lift Tape Sampling

The property owner, manager, or tenant uses inexpensive, clear, transparent, sticky, one inch (2.54 cm) wide adhesive tape, such as Scotch® brand or similar tape that is cut into three inch (7.6 cm) long strips to collect the mold samples. Complete Scotch tape lift sampling instructions are provided at www.moldexpertconsultants.com/diy_mold_testing.htm.

D.I.Y. Scotch tape lift sampling is an easy, inexpensive, and effective way to do mold sampling anywhere in Houston and south Texas when a person---

(a) Sees mold growing on a wall, ceiling, floor, carpeting, furniture, heating/cooling duct register, or other surface;

(b) Wants to know whether a particular stain, discoloration, growth, or mystery substance on the wall or another surface is actually toxic mold;

(c) Smells possible mold odors (caused by the digestive gas emitted by mold eating the home, building, or contents) and wants to test a number of surfaces upon which elevated levels of airborne mold spores may have landed or been deposited, such as on walls, window sills, window and door trim, refrigerator top, kitchen cabinet tops, undusted furniture, heating/cooling duct registers, and the return air filter in the heating/cooling system; and/or

(d) Wants to test the inside walls of heating/cooling ducts for the possible presence of elevated levels of mold spores.

2. Take and Submit Pictures of Water Damage and Mold Growth

To supplement the collected lift tape samples, the property owner, manager, or tenant takes close up pictures with a smart cell phone or digital camera of any visible building water damage or mold growth, as well as pictures of the entire building, room, and areas from which the close up photographs were taken.

3. Send Lift Tape Samples and Mold Pictures to Phillip Fry for Lab Analysis and Fry’s Written Report Analyzing the Lab Results and Pictures

Up to three different collected lift tape samples (or alternatively, 2 inch by 2 inch physical samples of the actual mold growth itself as cut from mold-infested building materials or other surfaces such as carpeting), along with the lab “chain of custody form” available at www.moldexpertconsultants.com/diy_mold_testing.htm, are then mailed (or sent via FedEx or an alternate delivery service) to EnviroFry, 10104 Sheridan Rd., Montrose, Michigan 48457, USA, along with the a check or money order for U.S. $200 payable to EnviroFry, or, alternatively, credit or debit card payment by sending money via www.paypal.com to the PayPal email payment address of phil@moldinspector.com.

Each lift tape sampling or physical mold sampling above the first three is only U.S. $35.00 per sampling to be lab analyzed.

Mold, building, and room or area pictures, along with a detailed description of any known building water leaks and flooding history or mould damage problems, should be sent either as actual developed photographs to the company address, or, preferably, as email attachments to phil@moldinspector.com.

Within five business days after EnviroFry’s receipt of the lift tape samplings and the mold pictures, Phillip Fry will provide via email: (a) the mold lab results from an expert mold analysis lab that is accredited by both the American Industrial Hygienists Association (accredited EMPAT Lab) and the State of Texas (Texas Lab Id: LAB1021); (b) Fry’s written analysis, opinion, and report as to the extent and severity of the mold infestation, as evidenced in the submitted samples and mold pictures; (c) Fry’s specific suggestions on how any discovered mold problem can be removed and remediated effectively, safely, and affordably on a do-it-yourself basis.

Read Fry’s recommended ten steps for successful, do-it-yourself mold removal at www.moldinspector.com/mold_removal.htm. Discover DIY effective mold killing and removal equipment and supplies at www.moldmart.net.

For more information about the EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing Protocol, please email Phillip Fry phil@moldinspector.com or phone toll-free (USA and Canada) 1-866-300-1616 or 1-810-639-0523 (worldwide), or cell-phone 1-480-310-7970 (worldwide), or visit www.moldexpertconsultants.com or the mold inspector directory www.certifiedmoldinspectors.com.


Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone toll-free (USA and Canada) 1-866-300-1616
Cell-Phone 1-480-310-7970
phil@moldinspector.com
http://www.moldexpertconsultants.com and
http://www.houstontoxicmoldtesting.com

EnviroFry Offers Manila Do-Your-Own Mold Tests with Tape Lift Sampling, Pictures, & Lab Report

EnviroFry announces its “do your own” mold testing service with a USA-accredited lab analysis report of collected samples and submitted mold pictures for homeowners and other property owners, managers, and tenants in Metro Manila, Cebu, Davao, Bacolod, and elsewhere in the Philippines.

Montrose, MI, October 16, 2014 -- “Homeowners, other property owners, managers, and tenants in Metro Manila, Angeles City, Cebu, Davao, Bacolod, Dumaguete, Ormoc City, Zamboanga, and elsewhere in the Philippines can now identify and quantify at low cost the toxic mold species types that may be infesting their buildings by using the do-it-yourself EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing Protocol,” announces EnviroFry co-manager Divine Fry, a Filipina living in the USA.

Fry is a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified Environmental Inspector, Certified Remediation Specialist, Certified Mold Inspector, Certified Mold Remediator, Certified Air Duct Cleaning Specialist, and co-webmaster of www.mold.ph and www.real-estate.ph.

The do your own mold testing protocol includes these steps:

1. Lift Tape Sampling

The property owner, manager, or tenant uses inexpensive, clear, transparent, sticky, one inch (2.54 cm) wide adhesive tape, such as Scotch® brand or similar tape that is cut into three inch (7.6 cm) long strips to collect the mold samples. Complete Scotch tape lift sampling instructions are provided at www.moldexpertconsultants.com/diy_mold_testing.htm.

Scotch tape lift sampling is an easy, inexpensive, and effective way to do mold sampling in Metro Manila, Cebu, and Philippines-wide when a person---

(a) Sees mold growing on a wall, ceiling, floor, carpeting, furniture, air conditioning duct register, or other surface;

(b) Wants to know whether a particular stain, discoloration, growth, or mystery substance on the wall or another surface is actually toxic mold growth;

(c) Smells possible mold odors (caused by the digestive gas emitted by mold eating the home, building, or contents) and wants to test a number of surfaces upon which elevated levels of airborne mold spores may have landed or been deposited, such as on walls, window sills, window and door trim, refrigerator top, kitchen cabinet tops, undusted furniture, heating/cooling duct registers, and the return air filter in the heating/cooling system; and/or

(d) Wants to test the inside walls of heating/cooling ducts for the possible presence of elevated levels of mold spores.

2. Take and Submit Pictures of Water Damage and Mold Growth

To supplement the collected lift tape samples, the property owner, manager, or tenant takes close up pictures with a smart cell phone or digital camera of any visible building water damage or mold growth, as well as pictures of the entire building, room, and areas from which the close up photographs were taken.

3. Send Lift Tape Samples and Mold Pictures to Mold Expert Divine Fry for Lab Analysis and Fry’s Written Report Analyzing the Lab Results and Pictures

Up to three different collected lift tape samples (or alternatively, 2 inch by 2 inch physical samples of the actual mold growth itself as cut from mold-infested building materials or other surfaces such as carpeting), along with the lab “chain of custody form” available at www.moldexpertconsultants.com/diy_mold_testing.htm, are then mailed (or sent via FedEx or an alternate delivery service) to EnviroFry, 10104 Sheridan Rd., Montrose, Michigan 48457, USA, along with the a check or money order for U.S. $200 payable to EnviroFry, or, alternatively, credit or debit card payment by sending money via www.paypal.com to the PayPal email payment address of phil@moldinspector.com.

Each additional lift tape sampling or physical mould sampling above the first three is only U.S. $35.00 per sampling to be lab analyzed.

Mold, building, and room or area pictures, along with a detailed description of any known building water leaks and flooding history or mold damage problems, should be sent either as actual photographs to the company address, or, preferably, as email attachments to phil@moldinspector.com.

Within five business days after EnviroFry’s receipt of the lift tape samplings and the mold pictures, Mrs. Fry will provide via email: (a) the mold lab results from an expert USA mold analysis lab accredited as an American Industrial Hygienists Association EMPAT Laboratory; (b) Fry’s written analysis, opinion, and report as to the extent and severity of the mold infestation, as evidenced in the submitted samples and mold and building pictures; (c) Fry’s specific suggestions on how any discovered mold problem can be removed and remediated effectively, safely, and affordably.

Read Fry’s recommended ten steps for successful mold removal at www.moldinspector.com/mold_removal.htm. Discover effective and affordable DIY mold killing and removal equipment and supplies at www.moldmart.net.

For more information about the EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing Protocol, please email Divine Fry phil@moldinspector.com or phone U.S.A. 1-810-639-0523 or cell-phone 1-480-310-7970, and visit www.moldexpertconsultants.com and the mold inspector directory www.certifiedmoldinspectors.com.

To be trained and certified as a Certified Mold Inspector and Certified Mold Remediator, visit www.ecology-college.com.


Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457, USA
Phone USA 1-810-639-0523
Cell-Phone 1-480-310-7970
phil@moldinspector.com
http://www.moldexpertconsultants.com and
http://www.moldinspector.com