DIY All Natural Mold Solution Keeps Homes Safe and Secure After Flooding

Storms and flash floods have been ravaging entire span of the nation, giving rise to severe losses in terms of both lives and property. The property damage left behind by floods include the growth of mold spores, which causes long-term influences and high restoration expenditures. But a new all natural DIY mold removal system or Professional mold removal services offered at Safe Mold Solutions helps do it yourselfers and needy homeowners alike.

New York, September 20, 2015/PressReleaseCircle/ -- The unexpected rise in the number of floods across the mainland, ranging from Arizona to Colorado has left thousands of homeowners in distress. Handling a loss of lives and property, dealing with reduced living conditions and lack of basic necessities such as electricity and drinking water, and preparing against an imminent outbreak of serious diseases caused by the floods, the woes of the residents of Arizona just keep growing.

The flash floods caused by enormous downpours left thousands stranded in the streets clogged with water, and knocked out the power grid causing a complete blackout across major cities such as Phoenix. The ripping winds and lightning strikes only added to the damage, peeling off roofs, starting fires, traversing enormous boulders across major highways, and pulling enormous trees right off their roots completing the devastation. The Phoenix fire department stated that it received it 400 emergency calls in just two hours after the rains broke out.

But these are just the immediate effects of the ravages of the flood. The aftermath that would be left behind by the sustained water logging and leakage of sewer waters that are suspected to get mixed with the rain water during floods are expected to cause even bigger problems.

Initially the removal of the water from the crawlspaces of the home such as attics, basements, floor level storage spaces, garages, and workshops alone can cost a fortune to the residents. And the time involved in draining the accumulated water can significantly impact the return to normal life for the residents.

The logged water has the tendency to give rise to mold spores that can grow on the sparsely ventilated spaces. The growth of mold spores pose an even greater threat than the physical damages itself as inhaling the spores can lead to long term respiratory ailments such as asthma on both children and adults alike, adding to the damage. But the growth of pores can be effectively contained and completely eradicated using proper drying techniques, mold removal methods and by use of proper disinfectants.

External agencies specialized in removing molds can be employed to counter the problems, but the majority rely on toxic chemicals that are actually ineffective. Safe Mold Solutions offers a toxic-chemical free solution effective at completely eliminating the molds that may have been formed due to continuous water logging, for homeowners in need. For the adventurous or cash challenged family they created the All Natural DIY mold removal system. By use of a tested 5 – step mold removal system the company also removes other parasitic infections, bad odors, mycotoxins, MVOC’s, and moisture to restore health to the flood ridden homes.

About Company: The brainchild of the pioneer in the mechanized mold removal technologies – Mr. Charles Boday, Safe Mold Solutions is a technology driven organization that strives to offer users with cost-effective and complete mold removal technologies. With shorter removal times and a complete care through a 5 step process, the technology is a game changer in the restoration of flood affected homes.

About: Contact Charles Boday, safemoldsolutions@gmail.com c/o 55 South Main St. Oberlin Ohio best selling Author of The Ultra Dry Basement, and Got Mold Now What? Or visit www.safemoldsolutions.com 800-948-4947 to solve a stubborn mold problem or buy a DIY Mold Removal Kit or visit www.ozonegenerator20000.com 800-240-8514 to buy an ozone generator, to blast away mold and mold odors.


Contact:
Charles Boday
Safe Mold Solutions
55 South Main St.
Oberlin, Ohio
800-948-4947
800-240-8514
safemoldsolutions@gmail.com
http://www.safemoldsolutions.com
http://www.ozonegenerator20000.com

Clean Coal Catalyst Formula Offers Fresh Hope for Coal’s Future

With the prospect of ever increasing regulations, the coal industry faces an alarming situation which threatens to spell the end for the fossil fuel that started it all. But new technologies and innovation such as the spray-on catalyst technology by Burn Less Coal coupled with new pollution reduction technology offers a clean solutions for coals future and saves power providers money too..


New York, September 20, 2015/PressReleaseCircle/ -- With the advent of cleaner and cheaper natural resources in energy production, the demand for the oldest fossil fuel of the planet is increasing while political will against its use is touted by politicians eager for environmental votes. Major coal companies have already expressed concerns over the declining buyer base who prefer cheaper natural gas resources for producing energy than the process-heavy coal. But low efficiency of coal based thermal power plants is just the tip of the iceberg of the numerous issues that threaten the stability of the sector.

Other major factors include strict environmental regulations devised to decrease the number of operating coal mines, green campaigns such as Obama’s Clean Air Act that impose a heavy financial burden on operating power plants, and the ever decreasing price of natural gas.

No doubt climate hawks will be rising a glass on the current scenario, but how does it auger for the future of the coal industry, jobs for the middle class, cheap energy prices, and so on? Well experts say at the current state, coal mining may even completely disappear from the charts as early as 2040.
The shifting trend has impacted even the major coal producers such as Patriot Coal and Walter Energy who have filed bankruptcy due to the steep decline of coal consumers. Studies show that the number of operating coal mines has reduced by 40% in the past decade alone. And the EIA reports that the number of coal mines operating in the US as of 2013 were in fact lower than the number of mines operating back in the 1800s when the first electric bulb was being invented.

While a number of old inefficient coal mines are facing closure, even the active ones operate sparingly to muzzle out the fractional demand of the power producers.

While a few coal producers are looking for a quick exit from the declining sector, some see the current scenario as an opportunity to take the lead. Using efficient mining techniques, environment friendly practices, and active research into producing energy efficient coal, existing manufacturers are slowly regaining momentum to get back on pace in the energy sector.

One particular technology that’s gaining momentum is the use of Burn Less Coal’s catalyst to increase the performance of coal used in power plants and also reduce the emissions produced from burning it. By reducing the amount of coal being burned, and burning more efficiently the amount of volatiles produced, are reduced and the overall efficiency of the plant can be increased up to 25% compared to using traditional coal. By generating massive savings for the plants it now becomes possible to fund the installation of a new type of wet electrostatic precipitator technology the provider can offer near zero discharge emissions.

About the Company: BurnLessCoal.com is an organization that has been established around a core objective of renewing coal’s lifespan as a sustainable energy source, and eliminating harmful emissions. Its spray on coal catalyst is a non-toxic, non-corrosive, and non-hazardous way of getting your coal to produce 15-25% more energy than it would without it. This catalyst will also help you save costs by increasing energy efficiency.


Contact:
Charlles Bohdy, Senior Partner
BURN LESS COAL
4456 North Abbe Rd #103
Sheffield Village, Ohio 44035
Toll Free 844-les-coal
Phone 844-537-2625 or 440-219-1606
info@burnlesscoal.com
http://www.burnlesscoal.com

GREEN CREATIVE Releases New PL EDGE Series Vertical DIRect and BYPass LED Lamps

South San Francisco, CA, September 18th, 2015/PressReleaseCircle/ -- GREEN CREATIVE, the commercial grade LED lighting manufacturer proudly announces the launch of its first PL V 11W DIR, PL V 11W DIR HIGH CRI and PL V 11W BYP lamps.

Part of GREEN CREATIVE’s new PL EDGE Series, the PL V DIR and PL V BYP lamps are CFL retrofit solutions for a variety of existing vertical lamp installations. All PL V lamps feature exceptional efficacy and a patent pending round diffuser that improves the overall light output and aesthetics of the fixture.

“At GREEN CREATIVE we pride ourselves on making products that seamlessly blend innovative design with the latest in LED technology,” says Marketing Manager, Matt Leonard. “Our new PL V DIR is a great example of this as it combines an original fully round design with a cutting-edge ballast smart control system.”

The PL V 11W DIR and PL V 11W DIR HIGH CRI lamps are compatible with 13W, 18W, 26W, 32W and 42W electronic programmed start ballasts so no rewiring is required during installation. These lamps also feature ballast smart control technology which allows for high performance on lower powered ballasts. The PL V 11W DIR HIGH CRI features a typical CRI 92, R9 71 and R13 94, providing crisp and vibrant colors across the whole spectrum. Both PL V DIR versions are compatible with G24q and GX24q (4-pin) installations.

The PL V 11W BYP lamp requires bypassing the ballast during installation and runs directly off line voltage to eliminate compatibility problems, incidental power loss, lifetime issues, and maintenance costs associated with ballasts. The PL V BYP lamp is compatible with G24d, GX24d, G24q and GX24q (2/4-pin) installations.

All PL V lamps turn on instantly and last 40,000 hours. The PL V DIR is available in 2700K, 3000K, 3500K, 4000K and 5000K CCT, the PL V BYP is available in 3500K and 4000K and the PL V DIR HIGH CRI is available in 3000K CCT.

Detailed information and data sheet for the PL V 11W DIR is available here.
Detailed information and data sheet for the PL V 11W DIR HIGH CRI is available here.
Detailed information and data sheet for the PL V 11W BYP is available here.

About GREEN CREATIVE
GREEN CREATIVE is a major solid state lighting development and manufacturing company based in the Bay Area, CA. The company specializes in retrofit lighting for the commercial market, offering a comprehensive line of LED lighting solutions. GREEN CREATIVE is fully integrated with strong R&D capabilities to constantly offer the latest technology available. For more information on GREEN CREATIVE please visit www.greencreative.com. For all of the latest updates follow GREEN CREATIVE on Facebook, Twitter and LinkedIn.


Contact:
Connor Doyle
GREEN CREATIVE
South San Francisco, CA 94080
Tel: (866) 774-5433
info@greencreative.com
http://www.greencreative.com

Hygienist Phillip Fry Introduces High Tech Mold Inspection for Mississippi Homes and Workplaces

Certified Environmental Hygienist Phillip Fry premieres advanced mold inspection and testing procedures for residences, income properties, and commercial buildings in Amory, Biloxi, Cleveland, Greenwood, Greenville, Gulfport, Jackson, Natchez, and elsewhere in Mississippi.

Montrose, MI, September 20, 2015/PressReleaseCircle/ -- Certified Environmental Hygienist Phillip Fry is now providing advanced mold inspection and testing procedures, such as fiber optics video camera and infrared camera inspection inside walls, ceilings, and floors, for residences, income properties, commercial buildings, and workplaces in Amory, Biloxi, Cleveland, Greenwood, Greenville, Gulfport, Jackson, Natchez, and elsewhere in Mississippi.

“The most dangerous toxic mold in Alabama homes and business buildings is the mold growth that is often hidden from view inside ceilings, walls, floors, attics, crawl spaces, basements, heating/cooling air supply ducts, and room and wall air conditioners,” warns Mr. Fry, who is webmaster of the websites www.mississippimoldinspection.com and www.moldinspector.com, which has been online as a mold authority website since 1999.

Mr. Fry’s firm EnviroFry Upkeep Masters, LLC, provides complete mold inspection, testing, removal, remediation, and prevention services throughout Mississippi, including Amory, Aberdeen, Booneville, Batesville, Brookhaven, Biloxi, Columbia, Crystal Springs, Clarksdale, Cleveland, Columbus, Corinth, Forest, Greenwood, Greenville, Grenada, Gulfport, Holly Springs, Helena, Hamilton, Hattiesburg, Indianola, Jackson, Kosciusko, Laurel, Leland, Louisville, Mississippi State, Meridian, McComb, New Albany, Natchez, Oxford, Pontotoc, Philadelphia, Picayune, Pascagoula, Ripley, Southaven, Starkville, Tupelo, West Point, Winona, Waynesboro, and Yazoo City.

Fry became one of the nation’s first full-time mold inspectors in January, 1999, and he is the author of five “plain English” mold advice books, available at www.moldmart.net.

The top dozen mold health problems, according to the U.S. Government's General Accounting Office “Indoor Mold” report, which summarized 32 federal government mold studies and reports, are:
1. Asthma, asthma triggers, or asthma symptoms (such as episodes or attacks)
2. Upper respiratory tract symptoms
3. Eye symptoms
4. Skin symptoms
5. Allergies or allergic reactions
6. Wheeze
7. Cough
8. Difficulty breathing, trouble breathing, or shortness of breath
9. Infections (including those affecting people who have chronic lung disease).
10. Adverse effects to the nervous system
11. Fungal colonization or opportunistic infections in immune-compromised individuals and
12. Hypersensitivity pneumonitis.

For information on Mississippi mold inspection, testing, and removal service, email mold expert Phillip Fry phil@moldinspector.com, or phone him toll-free 866-300-1616 or cell phone 480-310-7970, or visit www.mississippimoldinspection.com and www.moldexpertconsultants.com.


Contact:
Phillip Fry, Co-Manager
EnviroFry Upkeep Masters, LLC
10104 Sheridan Rd.,
Montrose, MI 48457
Phone toll-free 866-300-1616
Cell Phone 480-310-7970
phil@moldinspector.com
http://www.mississippimoldinspection.com and
http://www.moldexpertconsultants.com

Hygienist Phillip Fry Introduces High Tech Mold Inspection for Alabama Homes and Workplaces

Certified Environmental Hygienist Phillip Fry premieres advanced mold inspection and testing procedures for residences, income properties, and commercial buildings in Birmingham, Huntsville, Mobile, Montgomery, Opelika, Talladega, and Tuskegee, Alabama.

Montrose, MI, September 18, 2015/PressReleaseCircle/ -- Certified Environmental Hygienist Phillip Fry is now providing advanced mold inspection and testing procedures, such as fiber optics video camera and infrared camera inspection inside walls, ceilings, and floors, for residences, income properties, commercial buildings, and workplaces in Birmingham, Huntsville, Mobile, Montgomery, Opelika, Talladega, and Tuskegee, and anywhere else in Alabama.

“The most dangerous toxic mold in Alabama homes and business buildings is the mold growth that is often hidden from view inside ceilings, walls, floors, attics, crawl spaces, basements, heating/cooling air supply ducts, and room and wall air conditioners,” warns Mr. Fry, who is webmaster of the websites www.alabamamoldinspector.com and www.moldinspector, which has been online as a mold authority website since 1999.

Mr. Fry’s firm EnviroFry Upkeep Masters, LLC, provides complete mold inspection, testing, removal, remediation, and prevention services throughout Alabama, including Andalusia, Athens, Albertville, Anniston, Alexander City, Auburn, Arab, Bessemer, Blakely, Boaz, Birmingham, Brewton, Cullman, Clanton, Dothan, Daleville, Decatur, Demopolis, Enterprise, Eufaula, Florence, Fort Payne, Greenville, Gadsden, Guntersville, Hamilton, Hoover, Homewood, Huntsville, Jasper, Jackson, Lanett, Montgomery, Monroeville, Mobile, Opelika, Ozark, Prattville, Prichard, Phoenix City, Pell City, Piedmont, Russellville, Roanoke, Selma, Sylacauga, Scottsboro, Tuscaloosa, Troy, Tuskegee, and Talladega.

Fry became one of the nation’s first full-time mold inspectors in January, 1999, and he is the author of five “plain English” mold advice books, available at www.moldmart.net.

The top dozen mold health problems, according to the U.S. Government's General Accounting Office “Indoor Mold” report, which summarized 32 federal government mold studies and reports, are:
1. Asthma, asthma triggers, or asthma symptoms (such as episodes or attacks)
2. Upper respiratory tract symptoms
3. Eye symptoms
4. Skin symptoms
5. Allergies or allergic reactions
6. Wheeze
7. Cough
8. Difficulty breathing, trouble breathing, or shortness of breath
9. Infections (including those affecting people who have chronic lung disease).
10. Adverse effects to the nervous system
11. Fungal colonization or opportunistic infections in immune-compromised individuals and
12. Hypersensitivity pneumonitis.

For information on Alabama mold inspection, testing, and removal service, email mold expert Phillip Fry phil@moldinspector.com, or phone him toll-free 866-300-1616 or cell phone 480-310-7970, or visit www.alabamamoldinspector.com and www.moldexpertconsultants.com.


Contact:
Phillip Fry, Co-Manager
EnviroFry Upkeep Masters, LLC
10104 Sheridan Rd.,
Montrose, MI 48457
Phone toll-free 866-300-1616
Cell Phone 480-310-7970
phil@moldinspector.com
http://www.alabamamoldinspector.com and
http://www.moldexpertconsultants.com